Electric drive technology is continually advancing to improve fuel efficiency in the automobile industry. It could improve the fuel efficiency of automobiles by 50% as well as contribute to improving the fuel efficiency of agricultural machinery. The purpose of this study was to measure and analyze the power and current of an electric transplanter based on the planting distances during field operations. The electric transplanter was constructed by mounting the major components of a motor drive system onto a transplanter. The electric transplanter has a 3 kW motor power, and the major components include an inverter, battery, and a battery management system (BMS). The field tests were conducted by travelling at various speeds (300 and 760 mm/s) and by planting at various distances (260, 420 and 630 mm) with the working speed (300 mm/s) during travelling and transplanting as well as during travelling with transplanting operations. The results show that the required power increased when the travelling speed was fast. One-way ANOVA for the planting distance and Duncan’s multiple range test at a significance level of 0.05 were used to analyze the motor power using statistical analysis software (SAS 9.4, Statistical Analysis Institute Inc., 2002). In addition, the required power increased when the planting distances were short at every working condition. The results of this study provide useful information for the development an electric transplanter. 1.
KAMICO and KSAM (Korea Agricultural Machinery Industry Cooperative and Korean Society for Agricultural Machinery). 2015. Agricultural machinery yearbook republic of Korea. Korean Society for Agricultural Machinery, Suwon, Korea.
2.
Kang HM, Jung DB, Kim MJ, Min KD. 2013. Study of energy management strategy considering various working modes of plug-in hybrid electric tractor. Transaction of the Korean Society of Automotive Engineers – B 37:181-186. [In Korea]
3.
Kim DM, Nam YY, Seo JH, Jang JS. 2015a. Development and verification of analytical model of a pilot operated flow control valve for 21-ton electric excavator. Journal of Drive and Control 12:52-59. [In Korea]
4. Kim JY, Park YI. 2012. Analysis of agricultural working load experiments for reduction gear ratio design of an electric tractor powertrain. Transaction of the Korean Society of Automotive Engineers 20:138-144. [In Korea]
5.
Kim SC, Hong YK, Kim GH. 2015b. Development of an environmental friendly hybrid power system and its application to agricultural machines. Journal of Institute of Control, Robotics and Systems 21:447-452. [In Korea]
6. KOSTAT (Korean Statistical Information Service). 2013. Cultivated area of greenhouse crops. Statistics Korea, Daejeon, Korea.
7. Park MJ, Min KD. 2016. Study on the improvement methods of engine efficiency in hybrid excavator. Transaction of the Korean Society of Automotive Engineers 24:392-400. [In Korea]
8. Park YI, Kim YJ. 2014. Technology for the agricultural hybrid tractor. Journal of the Korean Society of Automotive Engineers 36:30-34. [In Korea]
9. Yoo IH, Kim BW. 2013. A Study of driving simulation considering the various working modes of electric tractor. Journal of the Korea Academia-Industrial Cooperation Society 14:5357-5365. [In Korea]
Journal Title :
Korean Journal of Agricultural Science
Volume :
45
No :
2
Page : pp
290~
297
Received Date :
9.
14.
2017
Accepted Date :
2.
14.
2018
Doi : https://doi.org/10.7744/kjoas.20180007
|